Vectrus is a single-braid rope of 100% Vectran™ LCP (Liquid Crystal Polymer) and is always treated with Yale’s Maxijacket coating to increase abrasion resistance and enhance the fibers’ UV resistance. LCP is more tolerant of tighter bending radii in terminations than other high-modulus fibers.
Approved Splice Technique: #10015112, #10018009.
| Diameter (Inches) | Weight (Lbs/100f) | Average Spliced Break Strength *(Lbs) | Minimum Spliced Break Strength *(Lbs) | Maximum Working Load 5:1 **(Lbs) |
| 1/16 | 0.2 | 800 | 720 | 160 |
| 1/8 | 0.4 | 2,790 | 2,511 | 558 |
| 5/32 | 0.9 | 4,820 | 4,338 | 964 |
| 3/16 | 1.2 | 5,600 | 5,040 | 1,120 |
| 1/4 | 1.9 | 8,200 | 7,380 | 1,640 |
| 5/16 | 2.8 | 16,260 | 14,634 | 3,252 |
| 3/8 | 4.0 | 19,470 | 17,523 | 3,894 |
| 7/16 | 5.5 | 26,390 | 23,571 | 5,278 |
| 1/2 | 7.5 | 32,000 | 28,800 | 6,400 |
| 9/16 | 10.0 | 38,000 | 34,200 | 7,600 |
| 5/8 | 12.7 | 52,500 | 47,250 | 10,500 |
| 3/4 | 19.4 | 70,000 | 63,000 | 14,000 |
| 7/8 | 24.5 | 89,000 | 80,100 | 17,800 |
| 1 | 31.1 | 109,000 | 98,100 | 21,800 |
| 1-1/4 | 46.1 | 147,000 | 132,300 | 29,400 |
| 1-3/8 | 58.4 | 187,000 | 168,300 | 37,400 |
| 1-1/2 | 67.9 | 210,000 | 189,000 | 42,000 |
| Diameter (mm) | Weight (Kg/100m) | Average Spliced Break Strength *(kg) | Minimum Spliced Break Strength *(kg) | Maximum Working Load 5:1 **(kg) |
| 2 | 0.3 | 360 | 324 | 72 |
| 3 | 0.6 | 1,265 | 1,139 | 253 |
| 4 | 1.3 | 2,185 | 1,967 | 437 |
| 5 | 1.8 | 2,540 | 2,286 | 508 |
| 6 | 2.8 | 3,720 | 3,348 | 744 |
| 8 | 4.2 | 7,380 | 6,642 | 1,476 |
| 10 | 6.0 | 8,835 | 7,952 | 1,767 |
| 11 | 8.2 | 11,980 | 10,782 | 2,396 |
| 13 | 11.2 | 14,525 | 13,073 | 2,905 |
| 14 | 14.9 | 17,250 | 15,525 | 3,450 |
| 16 | 18.8 | 23,835 | 21,452 | 4,767 |
| 19 | 28.9 | 31,780 | 28,602 | 6,356 |
| 22 | 36.5 | 40,405 | 36,365 | 8,081 |
| 25 | 46.4 | 49,485 | 44,537 | 9,897 |
| 32 | 68.6 | 66,735 | 60,062 | 13,347 |
| 35 | 87.0 | 84,895 | 76,406 | 16,979 |
| 38 | 101.1 | 95,340 | 85,806 | 19,068 |
* Knots and abrupt bends significantly reduce the strength of all ropes and lower the maximum working load.
** Working load is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of the rope’s rated working load constitute hazardous shock load and would void the normal working-load recommendation. Consult Yale Cordage for guidelines for working loads and the safe use of rope.
Specific Gravity: 1.40
Dielectric Strength: The maximum allowable leakage for clean, dry Vectrus is 100 micro-amperes when tested at 100kV per Yale Method 712-1701 Rev 1 "Routine Production Test". Absorbed and entrained moisture or impurities will increase rope’s conductivity dramatically.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
